Sinoboom GTJZ0612E, Maintenance Manual

Page: 51 / 94

MAINTENANCE
GTJZ0612E&0812E&1012E&1212E Maintenance Manual 4-13 © Jul.2020
Table 4-8
Model Test Result
GTJZ0612E
6.2 ～ 6.3 m (20.2 ～ 20.7 ft)
GTJZ0812E
8 ～ 8.1 m (26.2 ～ 26.6 ft)
GTJZ1012E
9.9 ～ 10 m (32.5 ～ 32.8 ft)
GTJZ1212E
11.8 ～ 11.9 m (38.7 ～ 39 ft)
A-16 Inspect Platform Lowering Limit
1. Park the machine on flat, level and firm ground.
2. Operate on the platform controller and raise the
platform to the highest position.
3. Then Lower the machine with platform controller to
a height as listed in the Table below. The machine
will stop lowering automatically. Release the control
handle and return it to the middle position. Reacti-
vate the lowering function using the platform con-
troller. After 5 seconds, the platform will continue to
lower.
Table 4-9
Models
Height
GTJZ0612E 1.7～2.3 m (5.6～7.5 ft)
GTJZ0812E 2～2.6 m (6.6～8.5 ft)
GTJZ1012E 2.5～3.1 m (8.2～10.2 ft)
GTJZ1212E 2.5～3.1 m (8.2～10.2 ft)
A-17 Inspect the battery level
Using the Battery Level Indicator
Table 4-10
PLATFORM POWER DISPLAY POWER RATIO DESCRIPTION
90-100%
The battery has been fully charged.
70%
The battery is at 70% of its capacity.
50%
The battery is at 50% of its capacity.
30%
The battery is at 30% of its capacity.
20%
The battery level is at 20%, which is low. The battery re-
quires recharging.
10%
The battery level is at 10%, which is very low. The machine
will become slow. The battery requires recharging.
NOTICE
Recharge the battery when the battery charge level is
about 20%, it must be charged. Never recharge a
completely discharged battery.