SINO SDS 2-3VA, Operation Manual

Page: 15 / 53

10
Press the or key until
the cursor moves to
to the option field of dithering
elimination.
2) Press the “+” or “-” function
key to switch the
dithering elimination
mode to 1.
3) Press the “Save” function key to save the modification.
4) Press the “Exit” function key to quit the interface of system parameter
setting.
2.11 Setting the Angle Display Type
The angle display mode has two types: degree and degree, minute and
second. After the angle type is switched, the display mode of each angle axis
is based on this parameter.
Factory default: decimal system
For example: Set the angle type
to degree, minute and second.
1) On the interface of system
parameter setting,
Press the or key
until the cursor moves to
to the option field of angle type.
2) Press the “+” or “-” function key to switch the angle type to degree,
minute and second.
3) Press the “Save” function key to save the modification.
4) Press the “Exit” function key to quit the interface of system parameter
setting.