6
Note: This parameter must be set by the installation personnel and
must not be modified by the user.
Factory default: 5 μm
For example, the resolution on axis X
is 1 μm.
1) On the interface of system
parameter setting,
Press the
or
key until the
cursor moves to
to the resolution option field for axis X.
2) Press the “+” or “-” function key to switch the resolution on axis X to
1 μm.
3) Press the “Save” function key to save the modification.
4) Press the “Exit” function key to quit the interface of system parameter
setting.
2.5 Setting the Counting Direction
After the user mounts the grating ruler or encoder, actual counting
direction may be just opposite to what the user expects. This user need can
be met in system parameter setting.
The counting direction of the grating rule is set by the installation
personnel and must not be modified by the user.
Factory default: 0
For example: The counting direction on
axis X is set to 1.
1) On the interface of system
parameter setting,
Press the
or
key until
the cursor moves to
to the direction option field for axis X.
2) Press the ”+” or ”-” function key to switch the direction of axis X to
1.
3) Press the “Save” function key to save the modification.
4) Press the “Exit” function key to quit the interface of system parameter
setting.
Summary of Contents for SDS 2-3VA
Page 1: ...LCD DIGITAL DISPLAY SDS 2 3VA OPERATION MANUAL...
Page 6: ...1...
Page 53: ...V1 0 202110...
