GB
Applique and blindstitch applique
Position applique piece on background fabric. Use the zig-
zag stitch or the blindhem stitch.
Align needle so that it pierces background fabric along the
outside edge of the applique. Lower presser foot. Set stitch
length between "1.5" and "3".
Begin sewing following the edge of your applique. To pivot
for curves or corners, leave needle down in fabric on outside
edge of applique, lift foot and pivot.
Tip:
If using the optional blindhem foot, align the lip of the
blindhem foot guide so that it sits directly under the edge of
the applique.
You may need to adjust the position of the guide to bring it
closer or further from the edge of the applique, by using the
thumbscrew located at the right of the foot.
56
