Sindoh D310 Series, User Manual, Page: 249 / 324

14.11 Setting the operating environment for this machine 14
[Web Management Tool] 14-24
14.11 Setting the operating environment for this machine
14.11.1 Configuring default settings for Normal Display and Enlarge Display collec-
tively
Select whether to arrange a single setting key for [Default Copy Settings] and [Default Enlarge Display Set-
tings], or [Default Scan/Fax Settings] and [Default Enlarge Display Settings].
If you wish to change the settings in Normal Display and Enlarge Display at the same time, select in the ad-
ministrator mode [System Settings] - [Reset Settings], and then set [Default Basic/Enlarge Display Common
Setting] to [Apply to all] (Default: [Do not Apply]).
14.11.2 Setting the action for switching the display to Enlarge Display
The default display mode of the Touch Panel can be set to Enlarge Display mode. You can also set the action
to be taken when the display mode is switched to Enlarge Display.
In the administrator mode, select [System Settings] - [Enlarge Display Settings], then configure the following
settings.
14.11.3 Configuring the default method to display destinations
Configure the default method to display destinations in the scan/fax mode or fax mode.
In the administrator mode, select [System Settings] - [Default Address Display Settings] - [Scan/Fax Settings]
or [Fax Settings], and configure the following settings.
Settings Description
[Default Enlarge Display
Setting] Select whether to use Enlarge Display mode as the initial display of the Touch
Panel .
[OFF] is specified by default.
[Enlarge Display Set-
ting] If you have set [Default Enlarge Display Setting] to [ON], select whether to en-
able Enlarge Display mode when the
Reset key is pressed.
If you wish to enable Enlarge Display mode when the Reset key is pressed, se-
lect [Enlarge].
[Normal] is specified by default.
[Apply Basic Setting to
Enlarge Display] Select whether to inherit the settings configured on the normal screen display
when switching the screen from Normal to Enlarge Display.
•
[Mode 1]: Inherit all normal mode settings.
• [Mode 2]: In Copy mode, only inherit Normal mode settings that can be set
in Enlarge Display mode. In Fax/Scan mode, reset the settings.
[Mode 2] is specified by default.
Settings Description
[Default Address Sort
Method] Select the list order of destinations by registration number and registration
name.
If you select the registration name, destinations are sorted according to [Name]
specified for the destinations.
[Registered No.] is specified by default.
[Default Address Dis-
play Method] Select the button or list type to display destinations.
[One-Touch Button Layout] is specified by default.