manualshive.com logo in svg

Sindoh D310 Series, User Manual, Page: 192 / 324

Share
Download
Sindoh D310 Series User Manual Download Page 192

[Web Management Tool]

12-45

12.19

Using the authentication unit

12

Setting to allow the user to register the IC card in the LDAP server

When authentication is performed on the machine using an IC card not registered in the LDAP server, con-
figure a setting to allow the user to register the IC card in the LDAP server.

The user can register information of a new IC card in the LDAP server, thereby, enabling the reduction of the 
user or administrator load.

In the administrator mode, select [User Auth/Account Track] - [LDAP-IC Card Authentication Setting] - [Card 
Information Registration Settings] - [Card Information Registration Settings], then configure the following set-
tings.

If [ON] is selected in [Card Info. Registration Settings], the setting of [LDAP-IC Card Authentication Setting] 
is changed as shown below.

When the secondary authentication server is not specified to be used:

-

[User Name] of [Server Registration] is set to [Acquiring].

-

The same attribute as that specified in [User Name Attribute] of this setting is set to [User Name Attrib-
ute] of [Server Registration].

When the secondary authentication server is specified to be used:

-

[User Name] of [Server Registration] is set to [Acquiring].

-

The same attribute as that specified in [User Name Attribute] of this setting is set to [User Name Attrib-
ute] of [Server Registration].

-

[User Name] of [Register Secondary Authentication Server] is set to [Acquiring].

-

The same attribute as that specified in [User Name Attribute] of this setting is set to [User Name Attrib-
ute] of [Register Secondary Authentication Server].

Tips

-

To use this function, you need to pre-configure a setting so that a user can register IC card information. 
On the 

Control Panel

 of this machine, select [Administrator Settings] - [System Settings] - [Restrict 

User Access] - [Restrict Access to Job Settings], then set [Biometric/IC Card Info. Registration] to [Al-
low] (default: [Restrict]).

12.19.3

Recording the authentication card ID in counter information of this machine

You can configure settings so that the authentication card ID is recorded in counter information that collects 
the use status of this machine.

In the administrator mode, select [User Auth/Account Track] - [Authentication Card ID Number], set [Authen-
tication Card ID Number] to [Notify] (Default: [Not Notify]).

Settings

Description

[Card Info. Registration 
Settings]

To register the IC card in the LDAP server when authentication is performed on 
the machine using an IC card not registered in the LDAP server, select [ON].
If [ON] is selected, enter the attribute such as "uid" to be searched as the user 
name in [User Name Attribute].
[OFF] is specified by default.

Summary of Contents for D310 Series





































































































































































































































































































































Reviews:

No comments