INSTALLATION INSTRUCTIONS
This product is suitable for use only with a supply voltage of 220-240V AC 50Hz.
All electrical work must be carried out in accordance with local and national electrical codes as applicable.
We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed in the circuit
for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, without the prior written approval of the
manufacturer, will void any and all stated warranties.
IMPORTANT
!
ECO SPOT SELECT
LHT1054 BLACK / LHT1055 WHITE
Twin 10W LED Sensor Light
The Simx Eco Spot Select incorporates a PIR (Passive Infra Red) motion sensing device
which continuously scans a preset operating zone and immediately switches the light on
when it detects movement in that area. This product is suitable for sheltered exterior
locations. It requires a 230V AC power supply to operate and should be installed by a
registered electrician.
TECHNICAL SPECIFICATIONS
Power Source
220-240V AC Class II
Detection Range
10 metres max, 150°
Time Setting
Min: 10sec ± 5sec
Max: 4min ± 1min
Dusk Control
Day to Night (adjustable)
PIR Aiming adjustment
Pan/Tilt
Sensitivity Control
Yes
Manual Override
Yes
Standby Power
<1W (sensor head only)
Rated Load
20 Watts
Lumens
3000K, 1800 lumens
s
n
e
m
u
l
0
0
0
2
,
K
0
0
0
4
s
n
e
m
u
l
0
0
0
2
,
K
0
0
0
5
Protection Rating
IP54
Mounting
Ceiling or wall
Construction
Polycarbonate UV stabilised
