Simrad TV80, Reference Manual

Page: 93 / 306

406388/B
91
3 Select
Edit Layout
.
Observe that the
Edit Layout
dialog box opens.
4 Type a new name.
Tip
If you do not have a computer keyboard connected to your TV80 system, select the
Keyboard
button to open an on-screen keyboard.
5 Select a function key.
The list will show only the “free” function keys.
Tip
The function keys on the bottom bar correspond to the different layouts defined in
the
Load Layout
dialog box. They provide fast access to the defined layouts of the
sensors views. The function keys are always available at the bottom bar of the TV80
presentation.
6 Select
OK
to save the chosen settings and close the dialog box.
Related topics
Load Layout dialog box, page 201
Layouts function, page 202
New Layout, page 224
Edit Layout dialog box, page 225
Creating a new sensor view
When you edit a view, you can add or remove gauges, resize them and save that view with a
name of your choice. In order to create a new view, you have to edit its content or its name.
Prerequisites
In order to create a new view or editing its content, you must open the TV80
Designer
.
There is at least one layout created. In this context, the different combinations of views is
called
layout .
Context
In a large system with many sensors in simultaneous use, it can be useful to have different
ways of having the information presented. According to the operating scenario or your
Operating procedures