Simrad TV80, Reference Manual

Page: 72 / 306

70
406388/B
5 Setup 170 dB as the maximum starting value.
6 Observe the graph in the
Spectrum
dialog box.
7 Place a sensor in the sea. Make sure that it is pointed towards the hydrophone.
8 Verify that the graph in the
Spectrum
dialog box reflects this.
9 If applicable, repeat the test for each input on the Receiver Unit
10 If applicable, repeat the test for each Receiver Unit
Context sensitive on-line help
Installed on your TV80 you will find a comprehensive context sensitive on-line help system.
Everything you can read in the TV80 Reference Manual can also be found in the on-line help.
The context sensitive on-line help is located in a single proprietary Microsoft ® CHM file.
This CHM file will run on any computer with a Microsoft operating system. You can also
copy the CHM file to any tablet device if you have a reader application that supports the
CHM format.
Note
Due to limitations defined by Microsoft ® , CHM files will not open from websites and servers.
To open the help system, select
Help
in any dialog box. This will provide instantaneous
information about the relevant dialog box. Links to related procedures and topics are
provided.
Navigation in the on-line help file is made by means of the menu system on the left side, as
well as the interactive links within the document.
Note
To open the on-line help on its start page, select
Help
on the top bar. To read about
a dialog box and the options provided, select the
[?]
button in its top right corner.
The TV80 on-line help may not be available for the language you have chosen for the user
interface. If your language is not supported, the English on-line help is provided.
Simrad TV80 Reference Manual