Simrad TV80, Reference Manual

Page: 51 / 306

406388/B
49
Procedure
1 Select the
Operation
icon.
The
Operation
function is located on the
Operation
menu.
2 Select
Operation
, and set it to Normal .
Result
The TV80 is now receiving data from the catch monitoring sensors installed.
Recording sensor data
The
Record
function allows you to record the data submitted by the all the “old” PI and PX
MultiSensor sensors installed. The data files can be copied or moved to other recordable
media, or to another computer on the network. You can keep the recorded files for scientific
studies, future references, or for training purposes. The recording is controlled by the
Record
function.
Prerequisites
Before you start data recording, make sure that you have defined where to store the files. To
define which disks and folders to use to save the data files, use the
File Setup
page. The
File
Setup
page is located in the
Operation
menu. If you wish to save your recorded data on an
external hard disk, make sure that it is connected to the Processor Unit.
Context
Data files will normally become very large. If you wish to record large amounts of TV80
data, make sure that you have enough space on your hard disk. Unless your Processor Unit
is equipped with a very large disk, we recommend that you save the data to an external
storage device.
Procedure
1 Select the
Operation
icon.
The icon is located under the
Main
menu. It is used to open the
Operation
menu.
Getting started