Simrad TV80, Reference Manual

Page: 243 / 306

406388/B
241
Unlock measurements dialog box
The
Unlock measurements
dialog box allows you to unlock extra measurements you want
your PX MultiSensor mk2, PX Universal and PX MultiCatch to make.
How to open
The
Unlock measurements
dialog
box can be opened from the
Unlock
measurements
button in any of
the
PX Configurator
dialog boxes.
The
PX Configurator
dialog box
is opened from the
Add New Sensor
dialog box. To open the
Add New
Sensor
dialog box, select
Add New
Sensor
at the bottom of the
Sensor
list
page. The
Sensor List
page is
located in the
Installation
dialog
box. The
Installation
dialog box
is located on the
Setup
menu.
Description
By default, PX MultiSensor mk2,
PX Universal, and PX MultiCatch
sensors can send 2 measurements.
When interfacing a SR type receiver unit, a PX Family sensor can send up to five
measurements. Additional measurements (up to 3) can be added.
Note
If you wish to make more than two measurements with your sensor, an additional license is
required. In order to obtain a license, contact your local dealer.
Pitch and roll calibration dialog box
If you wish to use the PX Multisensor to measure the pitch and roll of the trawl doors, you
must calibrate the sensor. You can calibrate a sensor in the
PX MultiSensor Configurator
dialog box.
Prerequisites
Calibration must be done with the sensor mounted in its installation adapter on the trawl
door(s).
Functions and dialog boxes