Simrad TV80, Reference Manual

Page: 22 / 306

20
406388/B
Processor Unit description
The Processor Unit is the computer that controls the TV80 system. It is a vital part of the
TV80 Catch monitoring software. It contains the operational software, and offers the user
interface that allows you to control the TV80. It also controls the interface to peripheral
devices. In this publication, the computer is referred to as the Processor Unit.
Related topics
Main system units, page 19
System diagram, page 17
PI50/60 Receiver Unit
The PI50 Receiver Unit supports maximum six measurements. The PI60 Receiver Unit
supports maximum ten measurements.
The PI50/PI60 Receiver Unit is housed in a small cabinet. All necessary input and output
sockets are easily available. The unit is powered by a small external power supply.
The PI50/PI60 Receiver Unit provides these interfaces.
• Serial line cable to the Processor Unit.
• One hydrophone.
• External power supply.
Related topics
Main system units, page 19
System diagram, page 17
SR15 Receiver Unit
The SR15 Receiver Unit allows you to receive information from the PX catch monitoring
sensors: PX MultiSensor mk2, PX MultiCatch and PX TrawlEye. The SR15 Receiver Unit
comprises a rugged box providing all necessary receiver electronics. The SR15 Receiver
Unit allows you to connect one single hydrophone. The receiver is designed for low noise,
and it can handle input signals spanning a very large instantaneous dynamic amplitude range.
The SR15 Receiver Unit supports the PX MultiSensor mk2, PX Universal, PX MultiCatch
and PX TrawlEye sensors, and maximum 80 measurements. The communication between
the SR70 and SR15 Receiver Units and the Processor Unit is made using a high speed
Ethernet line.
Simrad TV80 Reference Manual