Simrad TV80, Reference Manual

Page: 172 / 306

170
406388/B
Creating a TrawlEye view
The TV80 allows you to create as many views as you may need in order to have full control
of your operation. A
TrawlEye
view can contain an echogram or any other gauge showing
data from a specific TrawlEye sensor.
Prerequisites
A PX TrawlEye must be added to the system and configured.
There is at least one layout created. In this context, the different combinations of views is
called
layout .
Context
In a large system with many sensors in simultaneous use, it can be useful to have different
ways of having the information presented. According to the operating scenario or your
personal preferences, you can choose to edit the content of a view or creating a new one and
apply that selection to your current presentation.
The TV80 has a built-in gauges library with lots of visual elements that can be placed in the
sensor views. A gauge allows you to see the information you want from the sensor you want
and with the appearance you want. Each view contains one or more “gauges”.
Procedure
1 Select the area you want to create a new view for.
The "active" view is shown with a thicker red border frame.
2 Drag the cursor to the right side of the active view.
The
View
shortcut menu opens.
3 Select
Edit View
.
The Designer module opens.
4 Select
Add
on the top bar of the Designer module.
The
Gauges
dialog box opens.
5 Select the
TrawlEye
tab.
6 Click on the gauge and hold and move it to place it on your view.
You can increase or decrease the size of a gauge by clicking on the bottom right corner
and dragging until you get the desired size.
Note
The properties and parameters of an echogram can only be changed from the
Active
menu.
Simrad TV80 Reference Manual