Simrad TV80, Reference Manual

Page: 124 / 306

122
406388/B
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
3 At the bottom of the
Sensor list
page, select
Add New Sensor
.
The
Add New Sensor
dialog box opens.
4 Select
Yes
.
5 In the
PX Sensor Configurator
dialog box, select communication port and sensor type,
then select
Connect
.
The
PX MultiSensor mk2 Configurator
dialog box opens.
6 Select
Unlock measurements
.
The
Unlock measurements
dialog box opens.
7 Send the sensor’s PCB serial number to your local dealer.
Your local dealer will send you a license key string.
8 Enter the license key and select
Enter
.
9 Select
Close
to close the dialog box.
Result
The
PX MultiSensor mk2 Configurator
dialog box shows as many ”unlocked” measurements
as your license allowed, with a maximum of three.
Related topics
Measurements dialog box, page 257
Modifying the parameters of a sensor
When you select
Modify Sensor
you can change its location on the gear, its name, its
communication channel or its main configuration parameters.
Prerequisites
If a sensor was added to the system with the programming cable, you will only be able to
modify its parameters when connected to the cable. If a sensor was added to the system
without the programming cable, you will be able to modify its parameters even if it is
not connected to the cable.
Simrad TV80 Reference Manual