52
409977/B
3
On the left side of the
Installation
dialog box, select the small white triangle next to
Installation Parameters
.
Observe that a menu opens with access to all the individual pages.
4
Select
Transducer
to open the page.
a
Obtain the alignment angle from the personnel that installed the hull unit.
b
Make sure that the correct offset values have been inserted.
c
Make sure that the correct installation angles have been inserted.
d
Record the information in the result table.
5
Continue your work in the
Installation
dialog box, or select
OK
to close it.
Result
Transducer offsets
X Offset
Y Offset
Z Offset
Installation angle X
Installation angle Y
Installation angle Z
Requirements
Results
All offset values and installation angles are entered in the SU90.
All values are correct.
All values are recorded in the relevant table.
Date and signature:
Verifying the installation parameters for the
global positioning system (GPS) antenna
Information from a few key sensors are vital for the SU90 accuracy. In order to achieve
maximum accuracy, the physical locations of these sensors - normally referred to the
Ship Origin
- must be recorded in the SU90 setup. For future reference, the offset values
for each sensor is recorded.
Prerequisites
For accurate location of the global positioning system (GPS) antenna, you need the
detailed vessel drawings. Neither tools nor instruments are required. The SU90 system is
turned on and operates normally.
Simrad SU90 Harbour Acceptance Test
Summary of Contents for SU90
Page 61: ......
Page 62: ...2020 Kongsberg Maritime...
