Simrad SN90, Operator'S Manual

Page: 178 / 188

176
381295/B
Visual Objects menu
The
Visual Objects
menu controls which graphical elements that are shown in the
different views. These graphic elements include markers, vectors and targets that are
tracked. The majority of the functions are "on/off" buttons to enable or disable these
graphic elements in the SN90 views.
How to open
Select
Visual Objects
to open the menu.
Visual Objects
is located on the
Display
menu. The
function is not available for the Inspection views.
Description
Only brief descriptions are provided.
Tip
If you do not need to use the menu system, you can hide it. This allows more space for
the SN90 presentation. Use
Menu
on the top bar to hide or show the menu.
When the menu system is hidden, it appears temporarily on the left or right
hand side of the screen if you move the cursor to that position.
The choices in the this menu depends on which view in the SN90 presentation that is
currently "active". The menu may therefore change from one view to another. The
screen capture may not show you all the menu choices.
Note
Before you can change the settings related to a view, you must click inside the view to
activate it. The changes you make are by default only valid for the active view. Several of
the functions offer
Apply to All
. If you select
Apply to All
your setting is applied to all the
views in the current presentation mode.
•
Position Object Sizes
The
Place Marker
function allows you to create a marker at the current position of the
cursor. Each marker is shown as a small triangle with or without a short identifying
label. When you start target or position tracking, a marker is used to identify the
object. With this function you can increase or decrease the size of the markers.
Use this function to find the object sizes that fit your preferences. This may for
example depend on your physical distance from the screen. The choice you make
is saved with the user settings.
Simrad SN90 Operator Manual