Simrad SN90, Operator'S Manual

Page: 119 / 188

381295/B
117
Deleting user settings that are no longer used
When you save the user settings, the files you have created are shown on the
Saved
Settings
list. The list may be too long. User settings that you do not need can be deleted.
Context
The
User Settings
dialog box is used to store your favourite SN90 settings. These settings
can be related to different operations, environmental conditions or basic personal
preferences. You can use different settings to create as many user profiles as you like,
and give them any name. All the settings you have chosen using functions and dialog
boxes in the SN90 user interface are saved. To delete a user setting, select its name in the
list, and then select
Delete
. The factory settings can not be deleted.
Note
There is no "undo".
Procedure
1 Observe the
Main
menu.
Its default location is on the right side of the SN90 presentation.
2 Select
User Settings
.
Observe that the
User Settings
dialog box opens.
3 Observe the list of previously saved user settings in the
Saved Settings
list.
4 Select the setting you wish to delete.
5 Select
Delete
.
A small dialog box opens so that you can verify your choice. There is no "undo".
6 Observe that the name you have chosen is removed from the
Saved Settings
list.
7 Select
OK
to apply your changes and close the
User Settings
dialog box.
Related topics
Saving, retrieving and handling user settings, page 114
Operating procedures