Simrad FM90 Page 123 Reference Manual Download

Page: 123 / 140

922-00027001/2.2

121

Playback Console

Click to show or hide the

Playback Console

The

Playback Console

is also opened automatically when you choose a file

for playback.

Tip

During playback, you can also use the

Playback

and

Pause

buttons on the top bar.

The name of the playback file in use and the time and date of the recording.

The playback progress bar. Click and hold, then drag your mouse along the bar to
search through the recording. Click anywhere in the bar to jump to a specific point.

Click to stop the recording.

Click to pause the recording.

Click to fast forward through the recording.

Click to advance through the recording one ping at a time.

Click to repeat playback of the file on a never-ending loop.

Click to close the

Playback Console

. Closing the Console will not stop playback.

Related topics

Playing back a recording, page 55

Functions and dialog boxes

Summary of Contents for FM90













































































































































Search results

Summary of Contents for FM90

Reviews:

Related manuals for FM90

Brands by name

Popular brands

Simrad FM90, Reference Manual

Search results

Summary of Contents for FM90

Reviews:

Related manuals for FM90

Brands by name

Popular brands