Drawing file
Drawing file
This chapter contains relevant drawings related to the electrical and physical installation
of the Simrad ES38-12 Split beam transducer.
Note
The mechanical drawings are for information and guidance only. They are not in scale,
and may differ slightly from the original drawings. All dimensions are in mm unless
otherwise is noted.
The original installation drawings are available on PDF and/or DWG (AutoCad) format.
Visit
www.simrad.com
to download.
Topics
•
Echo sounder connections
on page 33
•
ES38-12 Outline dimensions and installation drawings
on page 36
Echo sounder connections
Observe the following information related to electrical connection of the ES38-12 Split
beam transducer.
Splicing the transducer cable
If you need to splice the transducer cable, it is very important to use the correct cable,
and to avoid ground loops. We strongly recommend the use of a junction box. We also
recommend that you install the transducer cable in a steel conduit.
For more information, see:
•
Transducer cable splicing
on page 32
•
Steel conduit
on page 25
•
General Purpose Transceiver (GPT) transducer plug assembly
on page 35
344276/A
33
Summary of Contents for ES38-12 - REV C
