Simrad ES333-7C
DRAWING FILE
This chapter contains relevant drawings related to the electrical
and physical installation of the ES333-7C Split-beam transducer.
Note
The mechanical drawings are for information and guidance only.
They are not in scale. All dimensions are in mm unless otherwise
is noted.
The original installation drawings are available on PDF and/or
AutoCad format. Visit
www.simrad.com
to download.
Topics
•
Echo sounder connections
on page 36
•
Outline dimensions and installation drawings
on page 39
Echo sounder connections
Observe the following information related to electrical
connection of the ES333-7C Split-beam transducer.
Topics
•
Splicing the transducer cable
on page 36
•
General Purpose Transceiver (GPT) wiring
on page 37
•
General Purpose Transceiver (GPT) transducer plug
assembly
on page 38
Splicing the transducer cable
If you need to splice the transducer cable, it is very important
to use the correct cable, and to avoid ground loops. We strongly
recommend the use of a junction box. We also recommend that
you install the transducer cable in a steel conduit.
Related topics
•
Transducer cable splicing
on page 29
•
Steel conduit
on page 30
•
General Purpose Transceiver (GPT) transducer plug
assembly
on page 38
36
329786/A
Summary of Contents for ES333-7C - REV A
