Simrad ES120-7C - REV D, Installation Manual, Page: 17 / 98

330254/B
15
Note
The anti-fouling paint will reduce the acoustical performance of the transducer. The
surface roughness of the transducer substrate and the thickness of the paint may also
influence the performance. Kongsberg Maritime cannot be held responsible for any negative
consequences of the anti-fouling paint.
Because some paint types may be aggressive to the polyurethane in the transducer, consult
our list of approved paints. The list can also be found on
http://www.simrad.com . Observe
the relevant instructions and safety information provided by the paint manufacturer.
Related topics
Transducer handling and maintenance, page 13
Approved anti-fouling paints
This is our list of approved antifouling paints for all transducer types. Always refer to the
manufacturer's documentation and data sheets for a complete procedure and for relevant
safety information.
Important
Do not paint the transducer with traditional hull plating paint. Use only the correct type of
approved paint specified.
Do not
use high-pressure water, sandblasting, metal tools or strong solvents to clean the
transducer face.
Jotun
•
Manufacturer
: Jotun
•
Address:
P.O.Box 2021, N-3248 Sandefjord, Norway
•
Manufacturer’s website
: http://www.jotun.com
Products:
•
Primer
: Safeguard Universal ES
Apply 80 µm wet film thickness (50 µm dry film thickness).
•
Paint
: SeaQuantum Ultra S
Apply 250 µm wet film thickness (125 µm dry film thickness).
Data sheets and application guides can be downloaded from:
Transducer handling and maintenance