Simrad ES120-7C - REV D, Installation Manual, Page: 10 / 98

8
330254/B
Order information
To order the ES120-7C, or any of the optional items provided with it, contact your local
dealer. If you do not have a regular dealer, a list of all our distributors and dealers can be
found on our website. Your dealer will also be able to help you with a detailed quotation
including price and delivery information.
Transducer
ES120-7C comes with two cable variants:
• 5-pair open-ended cable
Item Part number In the box
Transducer ES120-7C KSV-204580 Transducer
Bushing
Mounting hardware
• SubConn MCIL8M
Item Part number In the box
Transducer ES120-7C w/
SubConn
428873 Transducer
Mounting hardware
The ES120-7C Transducer with 5-pair open-end cable option is more suited in a fixed
installation, for example on a ship. The cable is shielded to make the transducer more
immune to noise. All the mounting descriptions found elsewhere in this manual refer to
this transducer type.
The ES120-7C Transducer with SubConn MCIL8M connector is more suited for smaller
vessels, for example unmanned surface vessels, or in a portable application. The most
suitable way of mounting this transducer depends on the type of application and is not
covered by this manual. It is important to take precautions in noisy environment as the
SubConn cable is not shielded.
Relevant documents and drawings (normally in PDF and/or AutoCad format) can be
downloaded from our website.
• https://www.simrad.com/td
Optional items
Mounting- and clamping rings are required if you wish to install the transducer through
a hull plating.
Simrad ES120-7C Installation Manual