Simrad ARGUS FMCW 3G, User Manual

Page: 61 / 150

| 59
Basic operation | Argus Radar Operator Manual
Zoom
To access this option, enable the “Zoom” checkbox.
A fixed size zoom window will be shown in the menu area. In zoom mode, a square will be
drawn on the PPI indicating the area which is zoomed. Use the center trackball key to move
the area, right key to increase zoom and left key to decrease it. The zoom area has fixed di-
mensions, so an increase/decrease operation will resize the PPI selection accordingly.
In zoom mode, it is possible to enlarge the selected area in the first PPI by up to a maximum
of eight times.
Once the function has been enabled, it is possible to interact through one of three options:
Relative
This means the possibility to follow your course throughout the route, viewing
the surrounding area in detail.
Geo
This means the possibility to focus the image in the geographic position for the
area you intend to monitor only.
Follow Tgt
This means the possibility to focus the image on a moving target, following it
along its route.
Customizing radar control settings
You can save up to 5 user defined control settings in the system. The function is used for
defining various conditions and user preferences.
The user settings are saved and recalled from the User settings menu.
You recall default control settings from the Main menu.