Simrad ARGUS FMCW 3G, User Manual

Page: 117 / 150

| 115
Tracking | Argus Radar Operator Manual
only on AIS targets. The various possibilities are further explained later in this paragraph
•
Status. Indicates the navigation status of the target. The information is available only on AIS
targets. The various possibilities are further explained later in this paragraph.
The switching between the presentation of 2 and 4 targets is easily performed by means of
the SKs, placing the trackball cursor in the target data window and looking at the Help line.
See the target data window below.
Target data window
Placing the trackball cursor inside it, the Help line will change as follows. Therefore, by means
of the right SK, the presentation can be switched to 4 targets mode, changing the target data
window as shown below.
Four targets
Switching from 2 to 4 targets presentation, the 3rd and the 4th fields will be empty, because
only 2 targets at the time could be selected so far. The above picture refers to the window
after the selection of other 2 targets. The Help line aspect will change consequently as follows,
giving the possibility to return back to the 2 targets presentation just by pressing the right SK
again. As shown in the Help line pictures, in the target data window the left and centre SKs
have their own function as well. Pressing the centre SK, the minimum safety window will be
displayed right under the target data window. Pressing it again, the minimum safety window
will be closed.
Safety menu