Simrad AP25, Manual

Page: 18 / 172

Simrad AP25 Autopilot
16
20221495F
The control unit shown above can operate as a stand alone unit
in an autopilot system or combined in a multistation system. In a
multistation system the command can easily be transferred from
one unit to another. Units not in control will display "Inactive"
and/or .
The AP25 system is capable of the following primary steering
modes: STBY (power steering), AUTO, NAV and WIND, each
mode having a dedicated push button.
Each of the mode push buttons is clearly identified with the
primary function in large text, and a secondary function listed in
smaller text. Each button provides you with a multiple function
mode display.
A group of user adjustable settings are provided in the AP25
User Setup Menu (page 50).
Alarms are presented in plain text to alert you of system and
external data failure conditions. Alarms include both audible and
visual presentations. The alarm listing is on page 139.
2.2 ON/OFF - Standby mode
Note !
At first time turn on see chapter 4.1.
A single press on the STBY button switches the system ON and
the following status displays are shown:
Autopilot computer model
P00 M00 S000
AC20
Simrad
Self check
Power board revision
Main board revision
Autopilot model
HW rev. 00
SW 1.2.01
AP25
Simrad
Hardware revision
SW 1.2.01
Software version
Software release
Software release
Software version
Sn xxxxxx
SimNet no.
SW and HW revisions shown are examples only.