Drawing file
DRAWING FILE
This chapter contains relevant drawings related to the electrical
and physical installation of the Simrad 38/200 Combi W Dual
frequency transducer.
Note
The mechanical drawings are for information and guidance only.
They are not in scale, and may differ slightly from the original
drawings. All dimensions are in mm unless otherwise is noted.
The original installation drawings are available on PDF and/or
DWG (AutoCad) format. Visit
www.simrad.com
to download.
Topics
•
Echo sounder connections
on page 33
•
Outline dimensions and installation drawings
on page 36
Echo sounder connections
Observe the following information related to electrical
connection of the 38/200 Combi W Dual frequency transducer.
Splicing the transducer cable
If you need to splice the transducer cable, it is very important
to use the correct cable, and to avoid ground loops. We strongly
recommend the use of a junction box. We also recommend that
you install the transducer cable in a steel conduit.
For more information, see:
•
Transducer cable splicing
on page 26
•
Steel conduit
on page 27
•
General Purpose Transceiver (GPT) transducer plug
assembly
on page 35
164986/D
33