background image

©2008 

SIMPSON 

STRONG-TIE 

COMP

ANY 

INC.

©2008 

SIMPSON 

STRONG-TIE 

COMP

ANY 

INC.

OPERATOR'S MANUAL

Model PT-22

5956 W. Las Positas Blvd., Pleasanton, CA 94588   •   www.simpsonanchors.com

Read This Manual

BEfORE Operating This Tool

Return Tools To:

Northwest USA 

Southwest USA 

Northeast USA

Simpson Strong-Tie Co.  Simpson Strong-Tie Co. 

Simpson Strong-Tie Co.

5151 S. Airport Way 

260 N. Palm Street 

2600 International Street

Stockton, CA 95206 

Brea, CA 92821 

Columbus, OH 43228

(209) 234-7775 

(714) 871-8373 

(614) 876-8060

Southeast USA 

Eastern Canada 

Western Canada

Simpson Strong-Tie Co.  Simpson Strong-Tie Co. 

Simpson Strong-Tie Co.

1720 Couch Drive 

5 Kenview Boulevard 

11476 Kingston Street

McKinney, TX 75069 

Brampton, Canada L6T 5G5  Maple Ridge, B.C. Canada V2X-0Y5

(972) 542-0326 

(905) 458-5538 

(604) 465-0296

Form T-SAS-PT2208  5/08

Simpson Strong-Tie Company Inc. (“Simpson”) provides this limited warranty to 
original purchaser. This product, if properly used and maintained in compliance with 
all instructions and warnings, will be free from substantial defects in material and 
manufacturing for 1 year from purchase date. Purchaser’s sole remedy is replacement 
upon return to Simpson within 1 year of purchase (shipping prepaid).  

WHERE LAWFUL, SIMPSON DISCLAIMS ALL OTHER 
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE BEYOND THIS WARRANTY 
PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS 
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE 
ABOVE LIMITATION MAY NOT APPLY TO YOU. WHERE 
LAWFUL, UNDER NO CIRCUMSTANCES SHALL SIMPSON 
BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL 

DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED 
TO BODILY INJURY, DEATH OR PROPERTY DAMAGE. SIMPSON’S ENTIRE LIABILITY IS 
LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATION OR EXCLUSION. MAY NOT APPLY TO YOU. SIMPSON IS IN NO WAY LIABLE FOR 
INCIDENTS RESULTING FROM USE WITHOUT PROPER CERTIFICATION OR DISREGARD OF 
INSTRUCTIONS AND WARNINGS. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

LiMiTEd wARRANTy (ONE yEAR) 

ON SiMPSON STRONg-TiE

®

 BRANd TOOLS

The PTP-22 tool complies with OSHA requirements  
and with ANSI A10.4 2007 specifications.

One Year

Limited

Warranty

Summary of Contents for Strong-Tie PT-22











Reviews: