Simpro Multi-Tip MT1200, User Manual

Page: 9 / 48

User Manual // Simpro Multi-Tip®
Original Instructions // English // v83.0 // October 2022 // Page
8
1.8 Environmental restrictions
The Multi-Tip may be used indoors or outdoors. However, the following restrictions apply:
1. A minimum floor area of two square metres, with a clear passage to exits;
2. Height above sea level not more than 1000m;
3. Ambient temperature not higher than +40
℃
and not lower than -10
℃
;
4. At ambient temperatures above 35
℃
, the relative humidity should not exceed 50%; at
lower temperatures, higher relative humidity is permitted;
Never operate the machine in explosive, corrosive, acidic or alkaline environments.
1.9 Ingress protection
Item IP Rating
Push buttons, switches, and lamps IP66
Door interlock IP66
Coded magnetic switch IP66
Motor IP54 (note additional protection provided by covers)
Overall IP54 (optional upgrade to IP66 or IP69K)
1.10 Notes
1. This User Manual describes approved procedures for the operation, maintenance,
and routine inspection of the Simpro Multi-Tip hydraulic bin-tipping machine.
2. This manual is written in English, and is to be conside e he ‘O g I s c s’ f
the purposes of EU Machinery Directive 2006/42/EC.
3. Operator(s) must read and understand this manual before using the machine.
4. If the machine is to be leased, sold, or otherwise transferred, then this manual shall
accompany the machine.
5. This is a generic manual. Simpro reserves the right to change the design of our
products at any time. In cases where a discrepancy exists between the manual and
the actual product, the manual is to be used as a reference only.
6. Contact your authorized Simpro agent if any problems or faults are encountered with
the machine.
7. Errors in this manual should be reported by email to info@simpro.world .