3.8
Preventative Maintenance Inspections
It is recommended to conduct regular preventative maintenance inspections (PMIs) of the
Multi-Tip. This helps to ensure operator safety and extend the service life of the machine.
The PMI schedule is divided into two parts: monthly and annual inspections. The PMI
procedures are described in the following pages, with logs for recording the results.
Simpro strongly recommends that safety inspections are carried out according to the
schedule described in this section.
Operators should immediately stop using the machine and request an inspection if any
fault or abnormal operation is observed.
3.8.1
Pre-inspection checklist
1.
Wear suitable Personal Protective
Equipment (PPE), including safety
boots and protective eyewear.
2.
Check that there are no ignition
sources nearby.
3.
Lower the cradle and remove bin.
4.
Turn off the key switch and unplug
the charging lead.
5.
Remove the powerpack cover.
6.
Clean the powerpack and electric
circuitry with compressed air.
7.
Always use height safety
equipment when servicing
elevated areas.
3.8.2
Monthly inspection
The following inspection should be carried out every month, and the results recorded in the
log on the following page.
Monthly Inspection Checklist
Category
No. Item
Check
General
1
Entire machine
Visually inspect for dented or broken parts.
Carry out a complete tipping cycle, watching for any
faults or abnormal behaviour.
Hydraulic
systems
2
Hydraulic Ram
Inspect for oil leaks.
3
Oil Reservoir
Check level of hydraulic fluid and top-up if necessary,
as per specifications in
Safety
systems
4
Dual-hand
controls
Dual-hand controls are working correctly
–
machine
stops instantly when SAFETY button is released.
Mechanical
systems
5
Inside of mast
Lightly lubricate with silicone spray.
6
Follower Roller
7
Cradle Axle
8
Tipping Guide
Flap
Flap is undamaged and moving freely.
9
Castor Wheels
All castors
running smoothly and both brakes working correctly.
Summary of Contents for Multi-Tip MT1200
Page 1: ...User Manual Simpro Multi Tip Original Instructions English v83 0 October 2022 USER MANUAL...
Page 3: ...User Manual Simpro Multi Tip Original Instructions English v83 0 October 2022 Page 2...
Page 43: ...User Manual Simpro Multi Tip Original Instructions English v83 0 October 2022 Page 42...
Page 47: ...User Manual Simpro Multi Tip Original Instructions English v83 0 October 2022 Page 46 9 Notes...