Simpro Ezi-MT, User Manual

Page: 18 / 36

3.5 Preventative Maintenance Inspections
It is recommended to conduct regular preventative maintenance inspections (PMIs) of the
Ezi-MT. This helps to ensure operator safety and extend the service life of the machine.
PMI procedures are described in the following pages, with logs for recording the results.
Simpro strongly recommends that safety inspections are carried out according to the
schedule described in this section.
Operators should immediately stop using the machine and request an inspection if any
fault or abnormal operation is observed.
3.5.1 Monthly inspection checklist
Monthly Inspection Checklist
Category No. Item Check
General
1 Entire machine
Visually inspect for dented or broken parts.
Conduct a complete tipping cycle and check for any
jams, faults, or abnormal behaviour.
2 Cradle Intact and securely fixed.
Safety
systems
3 Guard Panel Intact and securely fixed.
4
Winch Check that the winch does not allow the cradle to
descend without operator input, even with a full bin.
5
Safety labels
and markings
All warnings labels, guides etc are attached and
legible.
Mechanical
systems
6 Inside of mast Lightly lubricate with silicone spray.
7
Follower Roller
Lightly lubricate with silicone spray.
8 Cradle Axle Lightly lubricate with silicone spray.
9
Tipping Guide
Flap
Undamaged and moving freely.
10 Castor Wheels
All castors
running smoothly and both brakes working correctly.
1000000422
Hazard label 0250170001 Operation guide 1000000424
Wheel location guide 0090170085
0090120000
0230040001
Unbraked 0250040087 Braked 0250040090