SimpliVity OmniCube CN-2000, Installation And Maintenance Manual, Page: 34 / 66

CN-Series Hardware Installation and Maintenance Guide Verifying ESXi Shell and SSH are Enabled
Verifying ESXi Shell and SSH are Enabled
ESXi Shell and SSH are enabled by default.
Before You Begin
• You have configured IPMI and launched the Virtual Console.
• You have logged in to VMware ESXi.
To verify that ESXi Shell and SSH are enabled:
1.
Select
Troubleshooting Options
in the ESXi
System Customization
screen.
2.
Verify that both
ESXi Shell
and
SSH
are enabled.
Related Topics
Task 5—Configuring IPMI for Remote Management on page 27
Connecting to IPMI and Launching the Virtual Console on page 30
Accessing VMware ESXi Through the IPMI Virtual Console on page 33
Configuring the Management Network Adapters
You select the 1 GbE network adapters to use for the Management network. This procedure is specific ESXi
5.1. The assigned device names, for example, might be different for ESXi 5.5.
Before You Begin
• You have configured IPMI and launched the Virtual Console.
• You have logged in to VMware ESXi.
To configure the management network adapters:
1.
Select
Configure Management Network
in the
System Customization
screen.
2.
Select
Network Adapters
to display the Network Adapters configuration screen.
34