REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 2 |
leading from the batteries to the ExprESS fully integrated unit or other Balance of System equipment.
Doing so will minimize the risk of shock or sparks during the batteries’ installation.
Before commissioning the ExprESS or BOSS.6 Enclosure with Batteries, PHI batteries MUST be fully
charged. Failure to do so will Void the batteries’ Warranty.
9.
In addition to the instructions outlined in this BOSS.6 Enclosure manual, adhere to all installation and
commissioning protocols outlined in the
PHI Battery Installation Manual
. Failure to do so will Void the
batteries’ Warranty.
10.
Verify polarity at all battery module connections with a standard voltmeter before:
1) energizing the system and,
2) turning the PHI Battery’s circuit breaker “ON/OFF” switch to the “ON” position. Reverse polarity
at the PHI Battery terminals will Void the Warranty and destroy the PHI Batteries.
11.
Do not operate if the PHI Battery has been dropped or damaged in any way during shipping or
otherwise.
1.2 - Limitations of Use
The BOSS.6, ExprESS unit and PHI battery modules are not intended for use in connection with
life support systems or other medical equipment or devices.
2.0 - Product Description
2.1 - Introduction
This installation guide covers the recommended installation of the BOSS.6 Enclosure. More
information on SimpliPhi products, including the SimpliPhi batteries that the Enclosure is designed
to house, can be found on our website:
2.2 - Overview