SimpliFire • SF-SC43-BK, SF-SC-55-BK, SF-SC78-BK • 2041-980 • 1/19
12
E. Appliance Final Setup
Glass Removal:
Remove the two (2) ST5X8 thumb screws and retain
-
ing brackets. See Figure 4.12. Carefully remove glass
panel. Set glass aside by placing one edge on a soft
surface.
Figure 4.10 Media and Small Logs Installation
3. Arrange the larger logs so that one end rests on top
of a smaller log. Refer to Figure 4.11 as an ex-
ample.
Figure 4.11 Larger Log Installation
Log Media Placement:
1. Evenly spread the black and clear small crystals
across the ember bed. The black crystals provide
a more realistic ember look with the logs. Approxi-
mately 2/3 black to 1/3 clear crystal mix is a good
starting point. Adjustments can be made for your
individual preference.
2. Place the smaller logs evenly spaced on the ember
bed as shown in Figure 4.10.
Media Placement:
Note
: There are no specific requirements for media in
-
stallation. Crystal and log media are included, but not re-
quired. The placement instructions provided are the most
popular configurations to display the included media.
Clear Crystal Media Placement:
Carefully spread the small clear crystals across the em-
ber bed. Then evenly arrange the large crystals on top
of or within the small crystal media. See Figure 4.9.
Figure 4.9 Media Installation
