SimpliFire SF-BI30-E Owner'S Manual Download Page 1

Page: 1 / 26

SimpliFire • SF-BI30-E, SF-BI36-E • 2040-900 Rev. C • 2/13

Model(s):

WARNING: To reduce risk of fire, electrical shock, or personal injury, read all instructions

before using heater.

Owner’s Manual

Installation and Operation

DO NOT DISCARD THIS MANUAL

NOTICE

• Leave this manual with

party responsible for use

and operation.

DO NO

DISCARD

• Important operating

and maintenance

instructions included.

• Read, understand and follow

these instructions for safe

installation and operation.

SF-BI30-E,

SF-BI36-E

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN

THIS PRODUCT.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE

TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR

PROPERTY DAMAGE.

INSTALLER: DO NOT DISCARD THIS MANUAL -

LEAVE FOR HOMEOWNER - SAVE THESE INSTRUCTIONS

Summary of Contents for SF-BI30-E



























Search results

Summary of Contents for SF-BI30-E

Reviews:

Related manuals for SF-BI30-E

Brands by name

Popular brands

SimpliFire SF-BI30-E, Owner'S Manual

Search results

Summary of Contents for SF-BI30-E

Reviews:

Related manuals for SF-BI30-E

Brands by name

Popular brands