Simplex 4100ES-S1, Programming Manual

Page: 36 / 118

4100ES-S1 Programming Guide Document: LT0400
Addressable Device Settings
6-6
6.3.9 4090-9120AU 6 Point I/O Module (4 Inputs, 2 Relay outputs)
This device has multiple sub points. The sub points can have the point type changed depending on
the operation.
Mx-x-0 Parent Point
Device Type
MLPTIO
– Standard setting
Point Type
UTILITY
– Standard setting
Mx-x-1 to Mx-x-4 Sub Points (input)
Device Type
MINPUT
– Fixed Device type
Point Type
FIRE
– General Fire Point.
UTILITY
– Input used by Custom Control Logic only e.g., fan control inputs
TROUBLE
– Input used to indicate a Fault status
Mx-x-5 and Mx-x-6 Sub Points (relay outputs)
Device Type
MOUTPUT
– Fixed Device type
Point Type
RELAY
– General Purpose relay
TRELAY
– Fault Relay on until fault cleared
6.3.10 4090-9116 Addressable IDNET Isolator
Device Type
IDNETISO
– Standard Setting
Point Type
ISO
– Standard setting
6.3.11 4090-9117AU Addressable IDNET Power Isolator
Device Type
POWERISO
– Standard Setting
Point Type
ISO
– Standard setting