background image

Features 

 

Firefighter telephones provide direct 
communications with the Firefighter Telephone 
Control’s master phone: 

• 

When remote phones call the master, a call tone is 
provided to verify that the request is in process (exact 
performance may vary depending on master phone 
equipment) 

• 

Two-wire telephone circuits are supervised and 
power-limited 

• 

Compatible with 4100U Series and legacy 4100/4120 
Series Simplex® Firefighter Telephone Controls  

Phone assemblies are available for: 

• 

Surface or flush mounting, (NOTE: backbox is ordered 
separately) 

• 

Or as separate phone sets for plugging into dedicated 
remote phone jack stations 

Available options: 

• 

Break-rod door latch allows access during emergencies 

• 

Armored cable models to minimize vandalism (voice 
and ear caps are sealed with adhesive) 

• 

Push-to-talk (PTT) phones provide input control at the 
remote phone 

• 

Magnetic latch models with “Fire Warden Station” 
marking and LED call indicator 

• 

Additional options are listed on page 3 

Available Accessories: 

• 

Replacement break-rod 

UL Listed to Standard 864 

Description 

 

Firefighter telephone systems provide

 two-way 

communications for facilities where radio communications 
may not be available or are unreliable. They are typically 
used during active firefighting conditions, during a fire alarm 
investigation, or during fire alarm system inspection and test.  

Operation requires 

a dedicated two-wire circuit, typically 

using twisted, shielded pair wiring (TSP) to minimize 
electrical noise pickup from adjacent wiring. Depending on 
the master control, up to 6 remote phones and the master can 
be in simultaneous use. Additional information can be found 
in Installation Instructions 579-226 and on data sheet 
S4100-0034 which describes 4100U Master phone control 
operation. 

*    ULC listing is applicable to standard remote pluggable phone and phone jack station, refer 

to page 3 for agency status per model. This product has been approved by the California 

State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety 

Code. See CSFM Listing 6912-0026:054 for allowable values and/or conditions concerning 

material presented in this document. It is subject to re-examination, revision, and possible 

cancellation. Accepted for use – City of New York Department of Buildings – MEA35-93E. 

Additional listings may be applicable; contact your local Simplex product supplier for the 

latest status. Listings and approvals under Simplex Time Recorder Co. are the property of 

Tyco Safety Products Westminster. 

 

FIRE

PHONE

EMERGENCY

 

FIRE

PHONE

EMERGENCY

 

2084-9001 2084-9023 

Remote Phone Jack Stations 

 

LOCAL

FIRE EMERGENCY

PHONE

 

Door and Trim, Surface Mount 

LOCAL

FIRE EMERGENCY

PHONE

PULL FOR

EMERGENCY

ONLY

 

Door and Trim, Flush Mount  

with Pull Handle and Break-Rod 

 
 

 

 

 

Life Alarm

®

 Fire Alarm Systems 

UL, ULC, CSFM Listed; FM Approved;

 

 

Remote Emergency Telephone Equipment 

 

MEA (NYC) Acceptance*

 

2084 Series Firefighter Telephones

 

 

 

S2084-0001-8  5/2006

 

 

Reviews: