SimpleTech SimpleShare User Manual Download Page 74

Page: 74 / 120

Managing SimpleShare

Foreign and

LAIMING

LANK

ISK

FAT32

SimpleShare allows you to claim a blank disk and format it

with the FAT32 file system. Though SimpleShare recognizes

the drive as a foreign disk, this feature is useful the if you plan

to use the drive on Windows or Mac computers as well as

SimpleShare.

“Foreign and Blank Disk Management” on

page 52

provides detailed information on the limitations of

using FAT32 disks.

In the

Disk Management

menu, click

Basic

Select

Show Disk Details

Click the

button located to the right of the Blank

disk you want to claim.

The Show Disk Details checkbox is located at the bottom of

the Disk Management page. It may be necessary to use the

scroll bar to see the checkbox.

Claim

Summary of Contents for SimpleShare

























































































































Search results

Summary of Contents for SimpleShare

Reviews:

Related manuals for SimpleShare

Brands by name

Popular brands

SimpleTech SimpleShare, User Manual

Search results

Summary of Contents for SimpleShare

Reviews:

Related manuals for SimpleShare

Brands by name

Popular brands