SimpleTech SimpleShare User Manual Download Page 49

Page: 49 / 120

Managing SimpleShare

Share

REATING

HARE

Share Authentication only provides password protection on shares when accessed from Windows computers. To enable share

authentication, SimpleShare must be configured as a member of a Windows workgroup.

In the

Share Management

menu, click

New Share Name

, enter a descriptive name for the

share you want to create.

Choose the disk pool in which the new share will reside

from the

Create in Pool

list.

Select file system(s) supported on the share.

•

To enable CIFS support on the share for Windows

and Mac computers, select

CIFS Access

•

To enable NFS support on the share for Unix/Linux

computers, select

NFS Access

If the desired file system not available (checkbox is gray),

support for the protocol is not enabled on your SimpleShare

server. To enable file system protocol on SimpleShare, see

“Setting File System Support on SimpleShare” on page 34

Create Share

Summary of Contents for SimpleShare

























































































































Search results

Summary of Contents for SimpleShare

Reviews:

Related manuals for SimpleShare

Brands by name

Popular brands

SimpleTech SimpleShare, User Manual

Search results

Summary of Contents for SimpleShare

Reviews:

Related manuals for SimpleShare

Brands by name

Popular brands