SimonsVoss WaveNet, Manual, Page: 59 / 210

5.4.3.4 Adding Lock Nodes to WaveNet
If you want to use LockNodes in your WaveNet, you must first add the
LockNodes in the WaveNet Manager. LockNodes do not have an IP address
and can therefore only be found using the Chip ID. You can find the Chip ID
on the LockNode itself, on the supplied sticker or on its
packaging.RouterNode connected to the network.
You can later manually assign the LockNode to another RouterNode (see
Assigning LockNodes to another RouterNode [
}
144]
).
Single LockNode: Find Chip ID
ü
RouterNode is connected to the network.
ü WaveNet Manager opened via LSM (see Best Practice: From the LSM
software [
}
37]
)
ü LockNode installed or supplied with power.
ü LockNode within range of the WaveNet.
ü The chip ID of the LockNode is known.
1. Right click the entry WaveNet_XX_X.
9 The window "Administration" opens.
2. Select the option Find Chip ID.
3. Click on the OK button.
9 The "Administration" window closes.
9 The window "Search for node" opens.
WaveNet (Manual)
5. WaveNet Manager
59 / 210