SimonsVoss SI:SmartHandle Series, Manual, Page: 96 / 160

33. Carefully push the inlay (14) through the opening in the inside cover (13).
34.Push cover (13) onto the inside fitting (8), so that it is flush with the
door. The cover is not symmetrical; look carefully at the marking to en-
sure correct positioning (Diagram 7).
35.Click the inlay (14) carefully into the cover (13).
36.Press the cover plate (15) for the cylinder body carefully into the open-
ing in the inside cover (13).
37. Push the cover (2) over the outside handle (3).
38.Carefully push the inlay (1) through the opening in the outside cover (2).
39.Push cover (2) onto the outer fitting (4), so that it is flush with the door.
The cover is not symmetrical; look carefully at the marking to ensure
correct positioning (Diagram 7).
40
. Click the inlay (1) carefully into the cover (2).
8.8.6 Diagrams for conventional fastening system
Figure 2:
Handle fastener piece
Figure 3:
Handle fastener piece open
Figure 4:
Handle fastener piece closed
Figure 5:
Fastener piece - correct position for
the handle fastener piece when
closed
SmartHandle SmartIntego (Manual)
8. Installation (manual)
96 / 160