SimonsVoss SI:SmartHandle Series, Manual, Page: 66 / 160

36.Push the cover (13) over the inside handle (11).
37. Carefully push the inlay (14) through the opening in the inside cover (13).
38.Push the cover (13) onto the inside fitting (8), so that it is flush with the
door. The cover is not symmetrical; look carefully at the marking to en-
sure correct positioning (Diagram 7).
39.Click the inlay (14) carefully into the cover (13).
40
. Push the cover (1) over the outside handle (3).
41. Carefully push the inlay (1) through the opening in the outside cover (2).
42.Push the cover (2) onto the outer fitting (4), so that it is flush with the
door. The cover is not symmetrical; look carefully at the marking to en-
sure correct positioning (Diagram 7).
43.Click the inlay (1) carefully into the cover (2).
8.4.5 Conventional fastening system MO WP
Installation:
1. Optional: handles, escutcheons, fittings and other door furniture fitted
to the door are to be removed.
2. SmartHandle is partly assembled when supplied; see "Disassembly".
3. Optional: In a lock with an 8.5 mm or 10 mm spindle, push the corres-
ponding sleeve (8 mm --> 8.5 mm [not included in the supply package]
or 8 mm --> 10 mm) through the retainer opening in the mortise lock
from the inside.
SmartHandle SmartIntego (Manual)
8. Installation (manual)
66 / 160