6. Insert the new batteries with the positive terminal facing upwards
(Murata, Panasonic or Varta CR2032 (3V) batteries).
7. Carefully hook the battery clips back into the circuit board.
8. Replace the cover.
9. Press the cover against the base plate and screw the cover back in
place.
9
Batteries are replaced.
Reset battery
warning
ü
Batteries are replaced.
1.
Press
0
for more than two seconds to activate programming mode.
9
PIN code terminal beeps and flashes orange once.
2. Enter
99
.
3. Enter
99999
.
4. Enter the Master PIN.
9
Battery warning is reset.
8 Signalling
Signal
Description
Duration
key confirmation signal
Beep and flash green.
Split seconds
OK
Beep and flash green twice. 1 second
Wrong locking device or
locking device not reached
Beeps and flashes green
once and then red twice.
Seconds
PinCode-Terminal
8. Signalling
37 / 144
EN