Icon
Status
Information
Closed
Door is closed and bolt retracted
Open
Door open
Error message
undefined status /
warning / alarm
This icon has different meanings:
Door open too long Fastening
screw has been manipulated (no
longer addresses, has been
removed) Magnetic field
manipulation (magnetic field on
the fastening screw is too
extensive) Door has been forced
open (door is opened despite
locking)
Status unknown
Undefined status – the status is
unknown due to a malfunction or
a nonlogical change to the
system
Table 2:
Door monitoring icons in the matrix
Unknown status
The 'Unknown status' icon and the alarm icon do not change
automatically if the reason for the malfunction disappears (an
exception is the 'Door open too long alarm' which does not disappear
when the door is closed). The alarm must be reset
Error message
Action
Undefined door status
Door must be opened, then
closed again. Cylinder detects the
status and transmits it to LSM
Door open too long
Close door
Fastening screw has been
manipulated (has been removed)
Check fastening screw. Reset the
error once it has been eliminated;
see Section on
Magnetic field manipulation
(fastening screw magnetic field
too extensive)
Check door. Reset error; see
Section on
Door has been forced open (door
is opened despite locking)
Check door. Reset error
3.2 Read component
A locking device's status can be read at any time
Manual
Door Monitoring Cylinder
58 / 72
SimonsVoss
3 | Daytoday operation
