4 General
4.1 Product description
The SimonsVoss Digital Locking System 3060 is an electronic version of a
mechanical locking system with the functions of a typical access control
system.
Digital Locking Cylinder 3061 and the digital half cylinder are a main
component in the locking and access control system, where radio
communication replaces the mechanical authentication of a conventional
key.
This product description details both the locking cylinder and the half
cylinder. The design and operating mode of the two products are
comparable in many respects. Any differences between the two products
and different versions are pointed out in the corresponding sections.
'Locking cylinder' is taken to mean both 'locking cylinder' and 'half cylinder'
in this document unless explicitly stated otherwise or taken out of context.
Data are transmitted for authentication using a transponder (25kHz
inductive) or a smart card featuring the RFID standard MIFARE
©
Classic or
MIFARE
©
DESFire.
Refer to the respective manuals for details about smart card products
(SC). This description mentions the smart card cylinder, but does not
describe it in any detail.
The locking cylinder is supplied in different versions and meets different
profile standards, such as DIN 18252/EN1303, so that almost any lock
anywhere in the world can be retrofitted with this cylinder. Digital Locking
Cylinder 3061 has much to offer – greater security, greater flexibility, lower
costs, network-ready without any wiring on the door or frame and less time
and effort required for installation.
Digital Locking Cylinder 3061 is powered by two batteries in a redundant
system. Cylinders operate as stand-alone components thanks to this
integrated power supply, which also means there is no need to wire doors.
An intelligent battery warning system also increases reliability.
The SimonsVoss system elements are not configured before delivery from
the factory. They are first assigned to a locking system during initial
programming. This makes it easier for stock keeping and makes product
management simpler.
Thanks to modularity, all locking cylinders are seamlessly integrated into
the SimonsVoss System 3060 and, like all SimonsVoss components, they
can be programmed using the locking plan software. Other authentication
components, such as Pin Code Keypad 3068, Biometric Reader Q3008 or
Digital Locking Cylinder 3061
(Manual)
4. General
14 / 54