Simons Voss Technologies SmartHandle AX, Manual

Page: 155 / 178

2. Push the Allen wrench towards the nearer edge and hold it pressed.
3. Remove the handle from the assembly.
9 SmartHandle AX is disassembled.
15.3 Variant A3 (steel frame)
Remove fittings
1. Disassemble electronic cylinders if necessary.
2. Unscrew the headless screws of both handles.
3. If necessary, remove the escutcheon covers with a slotted screwdriver.
4. If necessary, remove the escutcheon covers.
5. If necessary, unscrew the escutcheon bases.
6. Remove the inlay of the inside handle with a slotted screwdriver.
7. Unscrew the screws of the base of the inside handle.
8. Remove the inside handle.
9. Take off the cover.
10. Unscrew the small screw at the round end.
11. Slide the assembly upwards.
12. Pull the assembly with the square end out of the adapter plate.
13. Unscrew the adapter plate.
9 SmartHandle AX is removed from the door.
14. Push the locking pin of the square inward and pull the square out of the
assembly.
SmartHandle AX (Manual)
15. Disassembly
155 / 178