Simons Voss Technologies SmartHandle AX, Manual

Page: 137 / 178

8 Configuration
8.1 Pulse length
SmartHandle is pre-set to engage for about 5 seconds. The time that it
engages can be freely configured between 1 and 25 seconds for each lock
in the software. This does not result in a shorter battery life.
8.2 Access control
Identification media bookings are logged if access control is activated. The
following information is stored in SmartHandle.

Date

Time

Identification medium ID
Each SmartHandle AX can store up to 3,000 bookings.
NOTE
These settings are only available in the .ZK version.
ü LSM open.
1. Double-click on the SmartHandle AX entry in the matrix to open the
settings.
2. Change to the [Configuration/Data] tab.
3. Enable the Audit trail checkbox.
4. Click on the Apply button.
5. Click on the Exit button.
9 Access control is enabled.
Only authorised transponder operations are logged by default. However,
you can also log non-authorised bookings (see
Logging unauthorised
attempted access events [
}
138] ). You will find information on how to
read access lists in the LSM manual.
8.3 Time zone control
You can load a time zone plan. Identification media will then be granted or
denied access based on their time zone group. Up to 100+1 time groups are
possible.
You can also implement automatic time-controlled changeover using a
time zone plan (see
Time switch-over function [
}
139] ).
SmartHandle AX (Manual)
8. Configuration
137 / 178