5 Programming
ü
LSM version 3.1 SP1 or higher installed.
ü
Programming device connected (SmartCD.G2 from firmware
9.10.4.40).
1.
Create a new G2 lock.
2. Right-click on the lock entry in the matrix to open the context menu.
3. Select the entry Programming .
9
Programmierfenster öffnet sich.
4. Activate the checkbox
Change programming options manually.
9
Manuelle Programmieroptionen freigeschaltet.
5. Activate the checkbox
Programming Compact Reader.
6. Place the lock and CompactReader 10-15 cm next to the program-
ming device.
7. Click on the button Programming .
9
Programmiergerät programmiert CompactReader und
Schließung.
9
Berechtigung von Karten an der Schließung ist möglich.
8. In the matrix, authorise the cards on the lock.
9. Program the lock or the cards as usual.
9
CompactReader programmed.
Make sure that you do not confuse the CompactReader and the lock
with other locks or CompactReaders.
CompactReader
5. Programming
31 / 136
EN
