Simoco SDP760, User Manual, Page: 19 / 85

1 Getting Started
This User Manual covers the basic operation of the Simoco SDP760 Digital Portable
radio.
The radio is software programmable and can be customised to the operational
requirements of a customer’s specific needs. Simoco representatives can help in
programming the radio facilities to meet a customer’s present and future
requirements.
Users should check with their Simoco dealer or system administrator about the
features programmed into the radio.
Preparing Your Radio for Use
Charging the Battery
For best performance, your radio is powered by a Lithium-Ion (Li-Ion) battery. To avoid
damage and comply with warranty terms, charge the battery using the charger
contained in the package.
Figure 1: Charging Diagram
Procedure
1. Plug the power adapter into the rear jack of the charger. See arrow 1.
2. Connect the power adapter to AC socket. See arrow 2.
3. Place the radio with the battery attached, or the battery alone, into the charger.
See arrow 3.
4. The charging process begins when the charger Light Emitting Diode (LED) glows
Red. The charging is complete when the LED turns Green.
Doc Number: TNM-U-E-0156 Issue: 2.3 Page 1