SDP660 – USER MANUAL
TNM-U-E-0114
Jun 15 (Iss. 1.4)
Page 48
MENU SCREENS
7.12
S
PEAKER
V
OLUME
M
ENU
The Speaker Volume Menu allows the user to set the radio start-up value of the audio volume
control for user comfort.
The ‘Speaker Volume’ menu is located under the Options menu.
Figure 37. Speaker Volume Menu.
The level can be set in 33 steps over the range 0 to 32, with 0 (zero) delivering no sound, 16 is
normal level and 32 giving the maximum possible output from the speaker.
Use the ▼ and ▲ keys to select the relative speaker volume level. A beep will sound at the
indicated level each time the setting is changed.
To accept and save the setting and return to the previous screen, press the ‘Select’ key.
7.13
A
LERT
V
OLUME
M
ENU
The Alert Volume menu allows the user to set the offset of the Alert Volume in relation to the
current Volume setting. Thus, the alert tones can be made louder or softer than the main voice
audio.
The ‘Alert Volume’ menu is located under the Options menu.
Figure 38. Alert Volume Menu.
The level can be set in 33 steps over the range 0 to 32, with 0 (zero) being about the same as the
voice level.
Use the ▼ and ▲ keys to select the relative alert volume level. A beep will sound at the indicated
level each time the setting is changed.
To accept and save the setting and return to the previous screen, press the ‘S’ key.
Note.
A minimum Alert Level may be set by the FPP to ensure that the Alerts can always be
heard from the speaker.
Back
Select
Spkr Volume
7
6
5
4
3
Back
Select
Alert Volume
7
6
5
4
3