SDP660 – USER MANUAL
TNM-U-E-0114
Jun 15 (Iss. 1.4)
Page 20
GETTING STARTED
Table 3. Charge Indications.
Charge State
LED States
Red LED
Green LED
Battery absent
Off
Off
Fast Charge
On
Off
Charge Complete
Off
On
Charge suspended (High or Low Temp
1 Hz Flashing
Off
2.1.2
Fitting the Battery
Insert the battery into the bottom of the radio. (See arrow 1 in
Figure 1
below).
Press down slightly on the battery release clip located at the top of the battery until a click is heard.
(See arrow 2).
Figure 1. Fitting the Battery.
To remove the battery, turn the radio off. Slide the battery release clip downwards to release the
battery.
2.1.3
Fitting the Antenna
With the radio turned off, locate the antenna in its threaded socket and turn clockwise to tighten.
Figure 2. Fitting the Antenna.
To remove the antenna, ensure the radio is turned off and turn the antenna anticlockwise.
1
2